Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 100)

86 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
show
2
Example
RFS7000>show wireless ap
Number of access-ports adopted : 0
Available licenses : 0
Clustering enabled : N
Clustering mode : primary
RFS7000>
RFS7000*>show wireless ap-detection-config
timeout : 300 seconds
mu-assisted scan : disabled
mu-assisted scan refresh : 1800 seconds
configured approved-aps :
Index | Bss Mac | Ssid
-------------------------------------------------------
RFS7000*>
RFS7000>show wireless ap-images
Idx ap-type Image-Name Size (bytes) Version
1 ap7131 WISP-ap7131 293516 00.02-29
2 ap7131 WIBR-7131 244076 01.00-1635b
3 ap7131 ap7131-IDS-Sensor 295064 00.00-04
RFS7000>
RFS7000>show wireless ap-unadopted
RFS7000>
RFS7000>show wireless approved-aps
access-port detection is disabled
RFS7000>
radio Radio related commands.
•
<1-1000> – A single radio index.
•
beacon-table – The radio-to-radio beacon table.
•
config <1-1000> – Radio configuration.
•
default-11a – Default 11a configuration template.
•
default-11b – Default 11b configuration template.
•
default-11bg – Default 11bg configuration template.
•
monitor-table – The radio-to-radio monitoring table.
•
statistics – Radio statistics.
regulatory Regulatory (allowed channel/power) information for a particular country.
self-heal-config
<1-1000> Self healing Configuration Parameters.
unapproved-aps Unapproved APs seen by access port or mobile unit scans.
wireless-switch-statistics
(detail) Switch statistics.
•
detail – Detailed switch statistics.
wlan Wireless LAN related parameters.
•
config <1-256> – WLAN configuration.
•
all – All WLANs in configuration.
•
enabled – Only WLANs currently enabled.
•
statistics <1-256> – WLAN statistics.