Redundancy-members – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 88
Advertising
74
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
show
2
redundancy-members
Common to all modes
This command displays the switches in the cluster which are all seen by the Brocade Mobility
RFS7000-GR Controller. The user can provide the IP address of the switch in cluster whose
information alone is needed.
Syntax
show redundancy-members (A.B.C.D|brief)
Parameters
Example
RFS7000(config)#show redundancy-members brief
Member ID (Self) : 10.10.10.10
Member State : Not Applicable
Member ID : 10.10.10.1
Member State : Peer Configured
A.B.C.D
IP address of the member switch.
brief
Displays members in brief.
Advertising