Ap-udp-port – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 510
Advertising
496
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
ap-udp-port
Wireless Configuration Commands
Use this command to configure the UDP port for layer 3 AP adoption. Configure the DHCP server
supporting the AP’s with the same parameter.
Syntax
ap-udp-port <1-65535>
Parameters
Example
RFS7000(config-wireless)#ap-udp-port 10
RFS7000(config-wireless)#
<1-65535>
The port number used for layer 3 AP adoption.
Advertising