Redundancy – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 224
Advertising
210
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
redundancy
Use this command to configure redundancy group parameters.
Syntax
redundancy(auto-revert|auto-revert-period|dhcp-server|discovery-period|
enable|group-id|handle-stp|heartbeat-period|hold-period|interface-ip|
manual-revert|member-ip|mode)
redundancy auto-revert (enable)
redundancy auto-revert-period <1-1800>
redundancy dhcp-server (enable)
redundancy discovery-period <10-60>
redundancy enable
redundancy group-id <1-65535>
redundancy handle-stp(enable)
redundancy heartbeat-period
redundancy hold-period <10-255>
redundancy interface-ip(A.B.C.D)
redundancy member-ip (A.B.C.D)
redundancy mode(primary|standby)
Advertising