Client-identifier – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 425
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
411
53-1001945-01
DHCP Config Commands
17
client-identifier
Use this command to assign a name to the client-identifier. A client identifier is used to reserve an
IP address for DHCP clients.
Syntax
client-identifier <ascii stringWORD>
Parameters
Example
RFS7000(config-dhcp)#client-identifier testid
RFS7000(config-dhcp)#
client-identifier
<ascii stringWORD>
Specifies the Ascii string.To prepend a null character , use
\\0
at beginning. A single
\
in the input is ignored.
Advertising