Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 104)

90 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
show
2
aclstats
Priviledge / Global Config
This command displays the statisitcs of all the access lists configured on the switch.
Syntax
show aclstats [access-list| vlan |]<name>|fe|ge <1-4>|sa <1-4>|tunnel <1-32>|vlan
<1-4094>]
Parameters
Example
RFS7000(config)#show aclstats vlan 4000
RFS7000(config)#show aclstats vlan ?
<1-4094> Vlan Id
RFS7000(config)#show aclstats vlan 4000
RFS7000(config)#
RFS7000(config)#interface fe
RFS7000(config-if)#
RFS7000(config)#interface ge 3
RFS7000(config-if)#
RFS7000(config)#interface sa 2
RFS7000(config-if)#
RFS7000(config)#interface tunnel 27
RFS7000(config-if)#
RFS7000(config)#interface vlan 400
RFS7000(config-if)#
access-list Configure access-lists
vlan Vlan Interface
IFNAME Interface name.
fe FastEthernet interface.
ge <1-4> GigabitEthernet interface. Select an index value between 1-4.
sa <1- 4> StaticAggregate interface. Select an index value between 1-4.
tunnel <1-32> Tunnel interface. Select from an index value between 1-32.
vlan <1-4092> VLAN interface. Select from an index value between 1- 4092.