Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 396)

382 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Standard ACL Config Commands
15
service
Standard ACL Config Commands
Use this command to invoke service commands to troubleshoot or debug (config-if) instance
configurations.
Syntax
service(show)(cli)
Parameters
Example
RFS7000(config-std-nacl)#service show cli
Standard ACL Config mode:
+-clrscr [clrscr]
+-deny
+-A.B.C.D/M [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M | host
A.B.C.D | any)(log|)(rule-precedence <1-5000> |)]
+-log [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M | host A.B.C.D
| any)(log|)(rule-precedence <1-5000> |)]
+-rule-precedence
+-<1-5000> [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M |
host A.B.C.D | any)(log|)(rule-precedence <1-5000> |)]
+-rule-precedence
+-<1-5000> [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M | host
A.B.C.D | any)(log|)(rule-precedence <1-5000> |)]
+-any [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M | host A.B.C.D |
any)(log|)(rule-precedence <1-5000> |)]
+-log [(deny|permit|mark (8021p <0-7> | tos <0-255>))(A.B.C.D/M | host A.B.C.D
| any)(log|)(rule-precedence <1-5000> |)]
+-rule-precedence
.................................................................................
.................................................................................
.................................................................................
RFS7000(config-std-nacl)#
show (cli) Shows CLI tree of current mode.