Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 589)

Brocade Mobility RFS7000-GR CLI Reference Guide 575
53-1001945-01
RTLS Config Commands
21
site
RTLS Config Commands
Use this command to configure RTLS site dimensions.
Syntax
site [description|dimension|name|scale]
site description <descriptionLINE>
site dimension [unit [feet|meters]|x <1-9000> y <1-9000>
z <0-180>]
site name <site-nameWORD>
site scale [<1-90>|auto]
Parameters
Usage Guidelines
Use
[no] site [description |dimension|name]
to rollback the configurations made using the
site
command
Example
RFSwitch(config-rtls)#site description "Brocade RMZ Ecospace,
India, 5th Floor"
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#site name "BLR-RMZ Ecospace"
RFSwitch(config-rtls)#
description <descriptionLINE> Configures site description
•
<descriptionLINE> – Enter a description for the site
dimension [unit {feet|meters}|x
<1-9000>
y <1-9000> z <0-180>] Configures site dimensions
•
length <value> – Configures site length. Select a value between
<1-9000> if the unit is in feet, and if the unit is in meters the value will
be between <1-3000>
•
width <value> – Configures width of the site. Select a value between
<1-9000> if the unit is in feet, and if the unit is in meters the value will
be between <1-3000>.
•
height <value> – Configures height of the site. Select a value between
<0-180>, if the unit is in feet and if the unit is in meters the value will be
between <0-60>unit – Configures the distance measurement unit to be
used for the site
•
feet – Site distances measured in feet
•
meters – Site distances measured in meters
name <site-nameWORD> Configures name for the site
scale [<1-90>|auto] Configures site scale
•
<1-90> – Configures scale value ranging between1-90
•
auto – Configures auto scale