Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 358)

344 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
mst Config commands
13
no
mst Config commands
Use this command to negate a command or set defaults.
Syntax
no [instance|name|revision]
Parameters
Usage Guidelines
The
no
command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
RFS7000(config-mst)#no instance 10 vlan 20
RFS7000(config-mst)#
RFS7000(config-mst)#no name MyRegion
RFS7000(config-mst)#
RFS7000(config-mst)#no revision
RFS7000(config-mst)#
instance Instance.
name MST region.
revision Revision number for configuration information.