Client-name – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 426
Advertising
412
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
DHCP Config Commands
17
client-name
Use this command to add a client name for the DHCP clients.
Syntax
client-name <nameWORD>
Parameters
Example
RFS7000(config-dhcp)#client-name testpc
RFS7000(config-dhcp)#
client-name <nameWORD>
Use
client-name
to add a client name. The domain name must not be included.
Advertising