Boot – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 193
Advertising
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
179
53-1001945-01
Global Configuration Commands
5
boot
This command reboots the switch with an image present in the mentioned partition (either the
primary or secondary partition).
Syntax
boot(system [primary|secondary])
Parameters
Example
RFS7000(config)#boot system primary
Wireless switch will be rebooted, do you want to continue? (y/n):y
Do you want to save the configuration? (y/n):y
The system is going down NOW !!
% Connection is closed by administrator!
Please stand by while rebooting the system.
system
Specifies the boot image used after reboot.
•
primary – Specifies the primary image.
•
secondary – Specifies the secondary image.
Advertising