Aeroscout – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 574
Advertising
560
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RTLS Config Commands
21
aeroscout
Use this command to configure support for Aeroscout RTLS engine.
Syntax
aeroscout [enable|multicast-listen-addr<MAC-Address>]
Parameters
Usage Guidelines
Use
[no] aeroscout (enable)
to disable support for Aeroscout RTLS engine. This does not
affect on-board locationing.
Example
RFSwitch(config-rtls)#aeroscout enable
RFSwitch(config-rtls)#
enable
Enables and configures external Aeroscout RTLS engine
multicast-listen-addr
<AA-BB-CC-DD-EE-FF>
Configures multicast MAC address to which Aeroscout tags packets are
destined
•
<MAC-AddressAA-BB-CC-DD-EE-FF> – Multicast MAC address.
AeroScout’s default multicast MAC address is ‘01:0C:CC:00:00:00’
Advertising