Dhcp – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 108
Advertising
94
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
show
2
dhcp
Priviledge / Global Config
Use this command to display DHCP Server configurations.
Syntax
show dhcp [config|status]
Parameters
Example
RFS7000#show dhcp config
service dhcp
!
ip dhcp pool vlan63
default-router 192.168.157.2
network 192.168.63.0/24
address range 192.168.63.20 192.168.63.30
RFS7000#
RFS7000#show dhcp status
DHCP Server is Not Running
RFS7000#
config
Displays DHCP server configuration.
status
Displays whether the DHCP server is running or not.
Advertising