Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 549)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 535
53-1001945-01
Wireless Configuration Commands
20
Parameters
clear
(wireless)(mobile-
unit)(association-
statistics)
Clear command.
•
wireless – Wireless parameters.
•
mobile-unit – Mobile-unit parameters.
•
association-history – association and reassociation statistics.
show (cli|radio-neighbor|
smart-rf|wireless) Shows running system information.
•
cli – Shows the CLI tree of the current mode.
•
radio-neighbor (mu) –Shows neighboring radios for a station.
•
mu <MAC> – Specify the MAC address of the MU.
•
smart-rf {debug-config|sensitivity} – Smart-RF Manangement commands.
•
debug-config – Displays smart-rf debug configuration.
•
sensitivity {mu|pattern|rates}– Displays sensitivity table.
•
mu <1-8192> <WORD> – Displays sensitivity table for a given mu.
•
<1-8192> – A single index.
•
WORD – MAC address of mu-cache-entry to show.
•
pattern – Displays sensitivity table for a common mu pattern. The pattern
are as follows:
•
pattern-11a 11a unit
•
pattern-11b 11b unit
•
pattern-11bg 11bg unit
•
pattern-2-mbps 2Mbps
•
rates <WORD> – Displays sensitivity table for a common mu pattern.
Specify the rate-flags in hexadecimal format.
•
wireless – Wireless parameters.
service (show) wireless
ap-history
< AP MAC Address> Access port serviceability parameters. Use history to access port history. The
following options can be used to access ap-history:
•
XX-XX-XX-XX-XX-XX – Access port MAC.
buffer-counters Allocation counts for various buffers.
enhanced-beacon-table
{config|report} Enhanced beacon table for AP locationing.
•
config – Enhanced beacon table for AP locationing Configuration Parameters.
•
report – Enhanced beacon table for AP locationing report.
enhanced-probe-table
{config|report} Enhanced beacon table for MU locationing.
•
config – Enhanced beacon table for MU locationing Configuration Parameters.
•
report – Enhanced beacon table for MU locationing report.
group <1-256> Displays radio group related debug information. Specify the index in the range
<1-256>
group-stats Displays radio group statistics information.,
Legacy-load-balance legacy load balance algorithm compatibility mode
mu-cache-buckets Wireless mobile units cache buckets.
mu-cache-entry
<1-8192> <WORD> Displays mu cache information.
•
<1-8192> –A single index.
•
<WORD> – MAC address of mu-cache entry to show.
mvlan Multi-Vlan debug stats.