Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 39)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 25
53-1001945-01
Common commands
2
ntp Configure NTP
prompt Reset system's prompt
radius-server RADIUS server configuration commands
ratelimit ratelimit
redundancy Configure redundancy group parameters
role Configure role parameters
service Service Commands
spanning-tree Spanning tree
snmp-server Modify SNMP engine parameters
timezone Revert the timezone to default (UTC)
traffic-shape Traffic shaping
username Establish User Name Authentication
virtual-ip Virtual IP
vpn vpn
wlan-acl Remove an ACL from WLAN
RFS7000(config)#no
Example (Others)
RFS7000(config)#no service advanced-vty
RFS7000(config)#
RFS7000(config)#no bridge multiple-spanning-tree
RFS7000(config)#
RFS7000(config)#no bridge instance <1-15> priority
RFS7000(config)#
RFS7000(config)#no bridge forward-time
RFS7000(config)#
RFS7000(config)#no bridge hello-time
RFS7000(config)#
RFS7000(config)#no bridge max-age
RFS7000(config)#
RFS7000(config)#no bridge max-age
RFS7000(config)#
RFS7000(config)#no bridge spanning-tree portfast bpdu-filter
RFS7000(config)#
RFS7000(config)#no bridge spanning-tree portfast bpduuard
RFS7000(config)#
RFS7000(config)#no bridge spanning-tree errdisable-timeout enable
RFS7000(config)#
RFS7000(config)#no bridge spanning-tree errdisable-timeout interval
RFS7000(config)#