Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 194)

180 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
bridge
Global Configuration Commands
Configures bridge specific details.
Syntax
bridge [<1-32>|multiple-spanning-tree]
bridge <1-32> [address|ageing-time]
bridge <1-32> (address)MAC [discard|forward](NAME|fe|ge|sa|tunnel|vlan)
bridge <1-32> (address)MAC [discard|forward] fe (vlan <2-4094>)
bridge <1-32> (address)MAC [discard|forward] ge <1-4> (vlan <2-4094>)
bridge <1-32> (address)MAC [discard|forward] sa <1-4> (vlan <2-4094>)
bridge <1-32> (address)MAC [discard|forward] tunnel <1-32> (vlan <2-4094>)
bridge <1-32> (address)MAC [discard|forward] vlan <1-4094> (vlan <2-4094>)
bridge <1-32> (ageing-time)<10-1000000>
bridge multiple-spanning-tree (enable)
Parameters
Usage Guidelines
Use
bridge multiple-spanning-tree
command to enable or disable MSTP globally. Use the
no
command with bridge-forward parameters to disable MSTP and change all ports to forwarding
state.
Example
RFS7000(config)#bridge multiple-spanning-tree enable
RFS7000(config)
<1-32>
[address|ageing-time] The bridge groups available for bridging.
•
address – Address of the selected bridge group.
•
ageing-time – Time a learned MAC address persists after last update.
(address) MAC
[discard|forward]
(NAME|fe|ge|sa|tunnel|
vlan) MAC address of the interface selected for bridging. The MAC address must be in
HHHH.HHHH.HHHH format.
•
discard – Discards the MAC address.
•
forward – Forwards the MAC address.
•
NAME – Interface name.
•
feme1 (vlan <2-4094>) – FastEthernet interface.
•
ge <1-4> (vlan <2-4094>) – GigabitEthernet interface index.
•
sa <1-4> (vlan <2-4094>) – StaticAggregate interface index.
•
tunnel <1-32> (vlan <2-4094>) – Tunnel interface index.
•
vlan <1-4094> (vlan <2-4094>) – VLAN interface index.
<1-32>
(ageing-time)
<10-1000000> Time a learned MAC address persists after last update.
•
(ageing-time) [0|<10-1000000>] – Ageing time (in seconds).
•
0 – Disables ageing.
•
<10-1000000> – Ageing time (in seconds).
multiple-spanning-tree
(enable) Enables Multiple Spanning Tree Protocol (MSTP) commands.