Group – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 474
Advertising
460
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RADIUS Configuration Commands
19
group
Use this command to configure RADIUS user group parameters. This command creates a group
within an existing RADIUS group.
Syntax
group
Parameters
Example
RFS7000(config-radsrv)#group TestGroup
RFS7000(config-radsrv-group)#
WORD
RADIUS group name.
Advertising