Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 330)

316 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Interface Config commands
12
exit
Interface Config commands
Use this command to end the current mode and move to the previous mode (GLOBAL-CONFIG). The
prompt changes to
RFS7000(config)#
.
Syntax
exit
Parameters
None.
Example
RFS7000(config-if)#exit
RFS7000(config)#