Exit – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 597
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
583
53-1001945-01
SOLE Config Commands
22
exit
Use this command to end current mode and move to the previous mode (GLOBAL-CONFIG). The
prompt changes to
RFS7000 (config)#
.
Syntax
exit
Parameters
None.
Example
RFS7000(config-rtls-sole)#exit
RFS7000(config-rtls)#
Advertising