Remote-login – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 227
Advertising
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
213
53-1001945-01
Global Configuration Commands
5
remote-login
Use this command to configure remote login parameters.
Syntax
remote-login (max-allowed-failure)<1-1024>
Parameters
Example
RFS7000(config)#remote-login max-allowed-failure 100
RFS7000(config)#
max-allowed-failure
<1-1024>
Maximum allowed login attempts failure before remote login is disabled.
•
<1-1024> – Number of failed login attempts.
Advertising