Country-code – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 196
Advertising
182
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
country-code
Use this command to configure the country of operation.
Syntax
country-code
Parameters
None.
Usage Guidelines
This command erases all existing radio configurations.
Example
RFS7000(config)#country-code ?
WORD the 2 letter ISO-3166 country code ("show wireless country-code-list" to
see list of supported countries)
RFS7000(config)#country-code us
RFS7000(config)#
Advertising