Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 465
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
451
53-1001945-01
RADIUS Configuration Commands
19
ca
Use this command to configure CA (Certificate Authority) parameters.
Syntax
ca trust-point(WORD)
Parameters
Usage Guidelines
Configure the trustpoint used by the local RADIUS server. Create the
trustpoint
before it is used
by the
crypto pki trustpoint
command.
The default trustpoint in use is –
default-trustpoint.
Example
In the example below, the trustpoint (
tp1)
already has a certificate associated with it.
RFS7000(config)#radius-server local
RFS7000(config-radsrv)#ca trust-point tp1
RFS7000(config-radsrv)#
trust-point (WORD)
Trustpoint configuration.
•
WORD – Existing trustpoint name.
Advertising