Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 238)

224 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
wireless [aap-version|ap|
ap-containment|
ap-detection-config|
ap-images|
ap-radio-config|
ap-adopted|
authorized-aps|
channel-power|
config|country-code-list|
default-ap|fw|hotspot|
hotspot-config|
ignored-aps|known|
mac-auth-local|mesh|
mobile-unit| Displays Wireless configuration commands.
aap-version – Displays the minimum Adaptive firmware version string.
ap [LIST|config] – Displays the status of adopted access-port.
•
LIST – Lists the MAC address of a single access-port or a list of indices for
detailed information.
•
config – Displays the status of configured access-port.
•
ap-containment [config|table]– Displays the Rogue AP containment
parameters.
•
config – Displays the configuration of the Rogue AP containment
parameters.
•
table – Displays the Rogue AP containment table.
•
ap-detection-config – Displays the detected-AP Configuration Parameters.
•
ap-images – Lists the access-port images on the wireless switch.
•
ap-radio-config [MAC ADDRESS] – Displays ap radio configuration.
•
MAC- ADDRESS – The MAC address ap radio to display information for.
•
ap-adopted – Lists unadopted access-port.
•
authorized-aps – Lists authorized APs detected by access-port scans.
•
channel-power – Lists the available channel and power levels for a radio.
•
config – Displays wireless configuration parameters.
•
country-code-list – Lists the supported country names and the corresponding
IS0 3166 codes.
•
default-ap – Displays information for default access-port.
•
fw [config] – Displays firewall information.
•
config – Displays configurable firewall parameters.
•
hotspot <query> – Displays hotspot configuration.
•
query – Displays hotspot query string configuration.
•
hotsppot <1-256> – Displays the hotspot configuration for a wlan of the index
<1-256>
•
known [ap] – Displays known ap parameters.
•
ap [statistics] <1-1024> – Displays the parameters of a known ap of the
index value <1-1024>
•
statistics <1-1024> – Displays one or more Adaptive ap for known ap
statistics of the index value <1-1024>.
•
mac-auth-local <1-1000> – Lists t the mac-auth-local entries.
•
<1-1000> – The mac-auth-local entry to display.
•
mesh [statistics] – Displays mesh related parameters.
•
statistics <1-32> – Displays statistics for mesh of index value <1-32>.
•
mobile-unit [ <1-8192> |<AA-BB-CC-DD-EE-FF>|
association-history|association-stats|probe-history|radio|roaming|statistics|
voice|wlan] – Displays details of associated mobile-units.
•
<1-8192> – The index of address of mobile units to display details for.
•
AA-BB-CC-DD-EE-FF – The MAC address of mobile units to display details
for.