Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 46)

32 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Common commands
2
Syntax (Global Config)
service [advanced-vty|dhcp|diag|password-encryption (secret)2 LINE|pm(restart)|
radius (restart)|set (command-history <10-300>|show (cli)|terminal-length <0-512>
|watchdog]
watchdog Enable the watchdog.
wireless
[ap-history|
buffer-counters|
clear-ap-log <1-256>|
dump-core |
idle-radio-send-multicast|
legacy-load-balance|
map-radios <1-127>|
rate-scale|
request-ap-log <1-256>|
save-ap-log|
snmp-trap-throttle] Wireless parameters.
•
ap-history – Access port history.
•
buffer-counters – Allocation counts for various buffers.
•
clear-ap-log – Clears ap logs.
•
dump-core – Creates a core file of the ccsrvr process.
•
idle-radio-send-multicast – Forward multicast packets to radios without
associated mobile units.
•
legacy-load-balance – Invoke legacy load balance algorithm with RFS7000-GR
Controller 1.0/1.1
•
map-radios – Sets radio-to-cpu mapping constant.
•
rate-scale – Enables wireless rate scaling (default).
•
request-ap-log – Requests access port log.
•
save-ap-log – Saves a debug/error log sent by the access port.
•
snmp-trap-throttle – Limit the number of SNMP traps generated from the
wireless module.