Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 44)

30 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Common commands
2
Syntax (Priv Exec)
service [clear|diag|diag-shell|encrypt|locator|pm|securitymgr|show|
watchdog|wireless]
service clear [all|aplogs|securitymgr (flows)[<0-349>|WORD|
all|ge|me1|sa|vlan]]
service diag [enable|identify|limit|period]
service diag limit [buffer (128|128k|16k|1k|256|2k|32|32k|4k|512|64|64k|8k)
<0-65535>|fan <1-3> (low)|filesys (etc2|flash|var)|
inodes (etc2|flash|var)|load (1|15|5)|maxFDs <0-32767>|
pkbuffers <0-65535>|procRAM <0.0-100.0>|ram <0.0-25.0>|
routecache <0-65535>|temperature <1-8> (critical|high|low)]
service encrypt (secret)<2> LINE
service pm (stop)
service securitymgr [disable|disable-flow-rate-limit|dump-core|enable-http-stats]
service show [cli|command-history|crash-info|diag|info|memory|
pm(history)[process-name|all]|process|reboot-history|securitymgr|startup-log|upgr
ade-history|watchdog|wireless]
service wireless [ap-history|buffer-counters|clear-ap-log <1-256>|dump-core
|idle-radio-send-multicast|legacy-load-balance|map-radios <1-127>|
rate-scale|request-ap-log <1-256>|save-ap-log|snmp-trap-throttle]
service (save-cli)
service (show)
show [ cli|
command-history|
diag|info|memory|
process|
reboot-history|
startup-log|
upgrade-history|
watchdog]
Displays the running system information.
•
cli – Shows CLI tree of current mode.
•
command-history – Displays a command (except show commands) history.
•
diag – Diagnostics.
•
info – Shows a snapshot of available support information.
•
memory – Shows memory statistics.
•
natstats – Shows ACL rule stats.
•
process – Shows processes (sorted by memory usage).
•
reboot-history – Shows reboot history.
•
rulestats – Shows ACL rule stats.
•
startup-log – Shows the startup log.
•
upgrade-history – Shows the upgrade history.
•
watchdog – Shows watchdog status.
service (wireless)
wireless Wireless parameters.