Rad-user – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 479
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
465
53-1001945-01
RADIUS Configuration Commands
19
rad-user
Use this command to add an existing RADIUS user to this group. If the RADIUS user is not available
in the Onboard RADIUS server’s database, create a new RADIUS user using
rad-user
command
from
(config-radsrv)
mode. For more details check
Syntax
rad-user
Parameters
Example
RFS7000(config-radsrv)#rad-user user1 password user1
RFS7000(config-radsrv)#group group1
RFS7000(config-radsrv-group)#rad-user user1
RFS7000(config-radsrv-group)#
WORD
Existing RADIUS user name.
Advertising