Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 320)

306 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Trustpoint Config commands
11
rsakeypair
Trustpoint Config commands
Use this command to configure a RSA Keypair to associate with the trustpoint.
Syntax
rsakeypair
Parameters
Usage Guidelines
Use RSA Key Pair support to configure the switch to have Rivest, Shamir, and Adelman (RSA) key
pairs. The switch software can maintain a different key pair for each identity certificate.
Example
RFS7000(config-trustpoint)#rsakeypair were
RFS7000(config-trustpoint)#
The
rsakeypair
name
were
in this example is an existing keypair value.
WORD RSA keypair identifier.