Service – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 262
248
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Crypto ISAKMP Config Commands
6
service
Use this command to invoke the service commands to troubleshoot or debug the
(config-crypto-isakmp)
instance configurations.
Syntax
service(show) (cli)
Parameters
Example
RFS7000(config-crypto-isakmp)#service show cli
Crypto Isakmp Config mode:
+-authentication
+-pre-share [authentication ( pre-share )]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-encryption
+-3des [encryption ( 3des | aes | aes-192 | aes-256 )]
+-aes [encryption ( 3des | aes | aes-192 | aes-256 )]
+-aes-192 [encryption ( 3des | aes | aes-192 | aes-256 )]
+-aes-256 [encryption ( 3des | aes | aes-192 | aes-256 )]
+-end [end]
+-exit [exit]
+-group
+-2 [group (2|5)]
+-5 [group (2|5)]
+-hash
+-sha [hash (sha)]
...................................................................
...................................................................
RFS7000(config-crypto-isakmp)#
show (cli)
Show CLI tree of current mode.