Mobile-unit – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 600
Advertising
586
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
SOLE Config Commands
22
mobile-unit
Use this command for mobile-unit configurations.
Syntax
mobile-unit (power-level <1-100> )
Parameters
Example
RFS7000(config-rtls-sole)#mobile-unit power-level 2
RFS7000(config-rtls-sole)#
power-level <1-100>
Specifies the mobile-unit power-level in dBm.
Advertising