Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 505)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 491
53-1001945-01
Wireless Configuration Commands
20
ap-detection
Wireless Configuration Commands
Use this command to configure access port detection.
Syntax
ap-detection [approvedadd|detected-wired-rogue|enable|mu-assisted-scan|timeout
(approved|unapproved)]
ap-detection approved add <1-200> (authorized|ignored)(MAC
Address|any)(SSIDLINE|any)
ap-detection detect-wired-rogue (enable)
ap-detection mu-assisted-scan(enable|refresh<30-86400>)
Parameters
Example
RFS7000(config-wireless)#ap-detection enable
RFS7000(config-wireless)#
RFS7000(config-wireless)#ap-detection approved add 150 authorized any any
RFS7000(config-wireless)#
RFS7000(config-wireless)#ap-detection mu-assisted-scan enable
RFS7000(config-wireless)#
RFS7000(config-wireless)#ap-detection mu-assisted-scan refresh 520
RFS7000(config-wireless)#
RFS7000(config-wireless)#ap-detection timeout approvedauthorized 500
RFS7000(config-wireless)#
approvedadd The approved access port list.Adds an entry in the authorized or ignored AP list.
•
add <1-200> – Adds an entry to the approved access port list.Specifies the
index where the entry is added.
•
authorized –This entry is authorized.
•
ignored – This entry is ignored.
•
MAC– MAC address in AA-BB-CC-DD-EE-FF format.
•
any– Any MAC address.
•
LINE–A string of up to 32 characters.
•
any– Any SSID.
detect-wired-rogue (enable) Detects the rogue APs which are also found on the wired network.
enable Allows access ports to look for access points.
mu-assisted-scan Mobile unit assisted scanning.
•
enable – Enables mobile unit assisted scanning.
•
refresh<30-86400> – The period (in seconds) used by all scan-capable mobile
units are polled to scan for neighboring access port’s.
timeout <1-65535> The interval (in seconds) an access port remains in the list after it is no longer seen.
Select one of the following options for timeout implementation.
•
approvedauthorized <1-65535> – Configures the timeouts in the authorized
APs.
•
unapprovedunauthorized<1-65535> – Configures the timeouts in the
unauthorized APs.
•
ignored <1-65535> – Configures the timeouts in the ignored APs