Change-passwd – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 142
128
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
change-passwd
Use this command to change the password of the logged in user.
Syntax
change-passwd
Parameters
None.
Usage Guidelines
A password must be between 8 to 32 characters in length. For safety, the console does not display
the user entered key words (refer example) for the
old password
and
new password
fields.
Ensure the console displays the password successfully changed message.
NOTE
The console, by default, does not display any user entered keyword for the old pasword and new
password fields.
Leaving the
old password
and
new password
fields empty displays the following error message:
Error: Invalid password length. It should be between 8 - 32 characters.
Example
RFS7000#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
RFS7000#