Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 336
Advertising
322
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Interface Config commands
12
mtu
Use this command to set the mtu value for a VLAN interface.
NOTE
This command is valid only with a VLAN interface.
Syntax
mtu
<512-1500>
Parameters
Usage Guidelines
All interfaces have a default maximum packet size of 1500 bytes. Use the
mtu
command to set the
MTU size of the packets thats travels through the interface.
Example
RFS7000(config)#interface vlan 20
RFS7000(config-if)#mtu 520
RFS7000(config-if)#
<512-1500>
Maximum packet size in bytes. The minimum value is 512 and maximum value is
1500.
Advertising