Service – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 585
Brocade Mobility RFS7000-GR CLI Reference Guide
571
53-1001945-01
RTLS Config Commands
21
service
Use this command to invoke service commands to troubleshoot or debug
(config-rtls)
instance configurations.
Syntax
service
[ap|filter|inventoryrtls|show]
service
ap <AA-BB-CC-DD-EE-FF>
service filter
<1-100> [action|length|mask|
memory-bank|name|offset]
service filter <1-100> action [allow|deny]
service filter <1-100> length <1-128>
service filter <1-100> mask <mask-nameWORD>
service filter <1-100> memory bank [epc|tid|uid]
service filter <1-100> name <nameWORD>
service filter <1-100> offset <0-32>
service inventory
[<1-100>|default]
service inventory <1-100> [duration <0-100000>|
filter{<1-100>|<name>}|report {current|differential}|
round <0-10>|start|start-trigger|stop-trigger|zone]
service inventory <1-100> start-trigger [gpi port <1-65535>
event <0-1> timeout <0-65535> |immediate|periodic
offset <0-65535> period <0-65535> ]
service rtls
(mode)[auto|presence|trilateration]
service inventory <1-100> stop-trigger [duration
<0-65535>|gpi port <1-65535> event <0-1> timeout <0-65535> |immediate]
service inventory <1-100> zone <1-48>
service show
cli