Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 518)

504 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
dhcp-sniff-state
Wireless Configuration Commands
Use this command to record mobile unit DHCP state information.
Syntax
dhcp-sniff-state
Parameters
Example
RFS7000(config-wireless)#dhcp-sniff-state enable
RFS7000(config-wireless)#
enable Enables the recording of DHCP state information for mobile units.