Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 464)

450 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
RADIUS Configuration Commands
19
authentication
RADIUS Configuration Commands
Use this command to configure an authentication scheme used with RADIUS server.
Syntax
authentication(data-source|eap-auth-type)
authentication data-source(ldap|local)
authentication eap-auth-type(all|peap-gtc|peap-mschapv2|tls|ttls-md5|
ttls-mschapv2|ttls-pap)
Parameters
Usage Guidelines
Set
eap-auth-type
to
all
to service any RADIUS request received from a mobile unit. Setting
eap-auth-type
to
peap-gtc/ peap-mschapv2
ensures
peap-gtc/peap-mschapv2
service
only.
Similarly, set
eap-auth-type
to
ttls-md5/ttls-mschapv2/ttls-pap
to service all ttls based
authentication RADIUS requests from the mobile unit.
Setting
eap-auth-type
to
tls
ensures only tls authentications are serviced.
Example
RFS7000(config-radsrv)#authentication eap-auth-type peap-mschapv2
RFS7000(config-radsrv)#
RFS7000(config-radsrv)#authentication data-source ldap
RFS7000(config-radsrv)#
data-source RADIUS data source for user authentication.
•
ldap – Remote LDAP server.
•
local – Local user database.
eap-auth-type RADIUS EAP and default authentication type configuration.
•
all – Enables both ttls and peap.
•
peap-gtc – Eap type peap with default auth type gtc.
•
peap-mschapv2 – Eap type peap with default auth type mschapv2.
•
tls – Eap type tls.
•
ttls-md5 – EAP type ttls with default auth type md5.
•
ttls-mschapv2 – EAP type ttls with default auth type mschapv2.
•
ttls-pap – EAP type ttls with default auth type pap.