Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 334
Advertising
320
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Interface Config commands
12
mac
Use this command to apply a MAC access list to a gigabit ethernet interface.
NOTE
Access list cannot be appllied on a management interface (me1).
Syntax
mac (access-group <acl_name>) (in)
Parameters
Example
RFS7000(config-if)#mac access-group Ark200 in
RFS7000(config-if)#
access-group <acl_name>
Sets MAC access groups ACL.
in
Applies the ACL to ingress packets.
Advertising