Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 517)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 503
53-1001945-01
Wireless Configuration Commands
20
dhcp-one-portal-fprward
Wireless Configuration Commands
Use this command to forward broadcast DHCP responses to one portal when the destination
mobile-unit is known from the response contient.
Syntax
dhcp-one-portal (enable)
Parameters
Example
RFS7000(config-wireless)#dhcp-one-portal-forward enable
RFS7000(config-wireless)#
enable Enables forwarding DHCP responses to one portal.