Country-code – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 514
Advertising
500
Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Wireless Configuration Commands
20
country-code
Wireless Configuration Commands
Use this command to configure the country of operation. This command erases the radio’s existing
configuration.
Syntax
country-code <country-code>
Parameters
Usage Guidelines
Use the
show wireless country-code
command to view the list of supported countries.
Example
RFS7000(config)#country-code us
WARNING: Select only the country in which you are using the device.
Any other selection may make the operation of this device illegal.
RFS7000(config)#
country-code
Uses the two letter ISO-3166 country code ("show wireless country-code-list") to view
the list of supported countries.
Advertising