Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 513)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 499
53-1001945-01
Wireless Configuration Commands
20
cluster-master-support
Wireless Configuration Commands
Use this command to change settings for cluster master support required for cluster-level
functioning.
Syntax
cluster-master-support (enable)
Parameters
Example
RFS7000(config-wireless)#cluster-master-support enable
RFS7000(config-wireless)#
enable Enables cluster master support, a partial set of configuration will be synchronized
with master.