Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 174)

160 Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
port (fw) Displays Physical/Aggregate port interface.
fw (config) – Displays Firewalls.
config – Displays configurable firewall parameters.
port-channel (load-balance) Displays Port channel commands.
load-balance – Load balancing
privilege Displays the current privilege level.
protocol-list Displays list of protocols.
radius
[configuration|eap|group|na
s|proxy|rad-user|
trust-point] Displays RADIUS configuration commands.
•
configuration – Displays radius server configuration parameters.
•
eap (configuration) – Displays eap parameters.
•
configuration – Displays eap configuration.
•
group – Displays Radius group configuration.
•
nas <A.B.C.D/M>– Displays client information.
•
A.B.C.D/M – Specifies client ip address/mask
•
proxy <WORD> – Displays proxy information.
•
WORD – Specifies proxy realm name.
•
rad-user <WORD> – Displays radius user information.
•
WORD – The existing user name in the local radius database.
•
trust-point – Displays Radius trust-point information.
redundancy-group
[dynamic-ap-load-balance|gr
oup|history|members] Displays redundancy group parameters.
•
dynamic-ap-load-balance (config) – Displays redundancy dynamic AP load balance
parameters.
•
config – Displays configuration details for dynamic AP load balance.
•
group[config|runtime] - Displays redundancy group parameters.
•
config –Displays configured redundancy group information.
•
runtime – Displays runtime redundancy group information.
•
history – Displays state transition history of the switch.
•
members [<A.B.C.D>|brief] – Displays redundancy group members in detail.
•
A.B.C.D – Specifies the IP address of teh member switch.
•
brief – Displays members in brief.
role [WORD|mobile-units] Displays role parameters.
•
WORD – Specifies the existing role.
•
mobile-units – Displays the mobile-units assigned with this role.
rtls [aeroscout|ekahau|site|
sole] Displays information on Real Time Locating System commands
•
aeroscout – Displays aeroscout configurations.
•
ekahau – Displays ekahau configurations.
•
site – Displays site configurations.
•
sole [peer|probe] – Displays SOLE configurations.
•
peer – Displays SOLE peer information.
•
probe – Displays probe information.
running-config
[full|include-factory] Displays the current operating configuration.
•
full – Displays full configuration.
•
include-factory – Includes factory defaults.
securitymgr Displays securitymgr parameters.
service-list Displays list of services.
sessions Displays current active open connections.