Halt – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 157
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
143
53-1001945-01
Priv Exec Command
4
halt
Use this command to halt the switch. This command is similar to
reload
command. The only
difference is that
halt
command stops the switch and
reload
stops and restarts the switch.
Syntax
kill
Parameters
None.
Example
RFS7000#halt
Wireless switch will be halted, do you want to continue? (y/n): y
Do you want to save current configuration? (y/n):
Advertising