Crl-check – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 467
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
453
53-1001945-01
RADIUS Configuration Commands
19
crl-check
Use this command to enable a Certificate Revocation List (CRL) check. To enable the certificate
revocation list, ensure
crl
list
is loaded using the
crypto pki import <trustpoint-name> crl
command.
Syntax
crl-check
Parameters
Usage Guidelines
A CRL that is updated with a trustpoint contains index numbers of all the revoked certificates. tls
authentication type uses certificate for authentication and the CRL checks for any revoked
certificate used for tls authentication.
Example
RFS7000(config-radsrv)#crl-check enable
RFS7000(config-radsrv)#
enable
Enables a CRL check.
Advertising