Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual

Page 85

Advertising

Brocade Mobility RFS7000-GR Controller CLI Reference Guide

53-1001945-01

show

Per AP MU Threshold : 32

RFS7000(config)#

RFS7000(config)#show redundancy-group

Redundancy Group Configuration Detail

Redundancy Feature : Disabled

Redundancy group ID : 1

Redundancy Mode : Standby

Redundancy Interface IP : 0.0.0.0

Number of configured peer(s) : 0

Heartbeat-period : 5 Seconds

Hold-period : 15 Seconds

Discovery-period : 30 Seconds

Handle STP : Disabled

Switch Installed License : 256

Switch running image version : 1.1.0.0-36536X

Auto-revert-period : 5 mins

Auto-revert Feature : Enabled

DHCP-Server Redundancy : Disabled

Redundancy Group Runtime Information

Redundancy Protocol Version : 2.0

Redundancy Group License : 0

Cluster AP Adoption Count : Not Applicable

Switch AP Adoption Count : Not Applicable

Redundancy State : Disabled

Radio Portals adopted by Group : Not Applicable

Radio Portals adopted by this Switch : Not Applicable

Rogue APs detected in this Group : Not Applicable

Rogue APs detected by this Switch : Not Applicable

MUs associated in this Group : Not Applicable

MUs associated in this Switch : Not Applicable

Selfhealing RPs in this Group : Not Applicable

Selfhealing APs in this Switch : Not Applicable

Group maximum AP adoption capacity : Not Applicable

Switch Adoption capacity : Not Applicable

Established Peer(s) Count : Not Applicable

Redundancy Group Connectivity status : Not Applicable

DHCP Server in group : Not Applicable