Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 282)

268 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Crypto Peer Config Commands
8
set
Crypto Peer Config Commands
Use this command to configure the aggressive-mode of
crypto-peer .
Syntax
set aggressive-mode (password)
Parameters
Example
RFS7000(config-crypto-peer)#set aggressive-mode password CheckMeIn
RFS7000(config-crypto-peer)#
aggressive-mode aggressive mode
password password