Domain-name – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 431
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
417
53-1001945-01
DHCP Config Commands
17
domain-name
Use this command to configure the domain name for the network pool. Use the
no domain-name
command to remove the domain name.
Syntax
domain-name (nameWORD)
Parameters
Usage Guidelines
The domain name cannot be more than 256 characters.
Example
RFS7000(config-dhcp)#domain-name Engineering
RFS7000(config-dhcp)#
domain-name (nameWORD)
Configures the domain name for the network pool.
Advertising