Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 551)

Brocade Mobility RFS7000-GR Controller CLI Reference Guide 537
53-1001945-01
Wireless Configuration Commands
20
custom-cli
[{sh-wi-mobile-unit
{ap-loan|ap-name|channel|
dot11-type|ip|last-heard|m
ac|radio-bss|radio-desc|ra
dio-id|ssid|state|username
|
vlan|wlan|wlan-id}|
sh-wi-radio
{adopt-info|ap-locn|ap-mac
|
ap-name|channel|dot11-ty
pe|mum-mu|power|
pref-id|radio-bss|
radio-desc|radio-id|state|]} Customizes the output of some summary cli commands in wireless.
•
show-wi-mobile-unit – Customizes the output of the
show wireless
mobile-unit command.
•
ap-locn – Specifies the location of the AP where the mobile-unit is
associated.
•
ap-name – Specifies the name of the AP where the mobile-unit is
associated
•
channel – Specifies the channel of the radio where the mobile-unit is
associated
•
dot11- type –The dot11 radio type of the mobile-unit
•
ip – The IP address of the mobile-unit
•
last-heard – Specifies the time when a packet was last received from the
mobile-unit.
•
mac – MAC address of mobile-unit.
•
radio-bss – The bssid of the radio where the mobile-unit is associated.
•
radio-desc – Description of radio where the mobile-unit is associated.
•
radio-id – Radio index to which the mobile-unit is associated.
•
ssid – The ssid of the mobile-units wlan.
•
state – The current state of the mobile-unit.
•
username – The Radius username of the user connected through this
device.
•
vlan – The vlan-id assigned to the mobile-unit.
•
wlan – The wlan description the mobile-unit is using.
•
wlan-id – The wlan index the mobile-unit is using.
show-wi-radio – Customizes the output of the show wireless radio
command.
•
adopt-info – Adoption information about the radio.
•
ap-locn – Specifies the location of the AP to which this radio belongs.
•
ap-mac – MAC address of AP to which the radio belongs.
•
ap-name – Name of the AP to which this radio belongs.
•
channel – The configured and current channel of the radio.
•
dot11-type – The dot11 type (11a/11g etc)of the radio.
•
num-mu – The number of mobile devices associated with this radio.
•
power – The configured and current transmit power of the radio.
•
pref-id – The adoption preference id of the radio.
•
radio-bss – The bssid of the radio.
•
radio-desc – The description of radio.
•
radio-id – The radio index in configuration.
•
state – The current operational state of the radio.
dot11i(enforce)
(pmkid-validation) Modifies dot11i service parameters.
•
enforce – modifies enforcement of various dot11i validations.
•
pmkid-validation – Toggles pmkid validation in dot11i handshake message
from client.