Configure – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 148
Advertising
134
Brocade Mobility RFS7000-GR CLI Reference Guide
53-1001945-01
Priv Exec Command
4
configure
Use this command to move into the configuration mode.
Syntax
configure terminal
Parameters
Example
RFS7000#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
RFS7000(config)#
terminal
Configures from the terminal.
Advertising