Exit – Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 433
Advertising
Brocade Mobility RFS7000-GR CLI Reference Guide
419
53-1001945-01
DHCP Config Commands
17
exit
Use this command to end the current mode and move to the previous mode (GLOBAL-CONFIG). The
prompt changes to
RFS7000(config)#
.
Syntax
exit
Parameters
None.
Example
RFS7000(config)#ip dhcp pool TestPool
RFS7000(config-dhcp)#exit
RFS7000(config)#
Advertising