Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 18)

4 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Common Criteria Operational Requirements
1
Switchport settings: access, access-vlan: 2
input packets 0, bytes 0, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 0, bytes 0, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
RFS7000(config-ext-macl)#show interfaces ge1
Interface ge1 is UP
Hardware-type: Ethernet, Mode: Layer 2, Address: 00-15-70-38-08-43
Index: 2001, Metric: 1, MTU: 1500, Status-flags: <UP,BROADCAST,RUNNING,MULTIC
AST>
Speed: Admin Auto, Operational 100M, Maximum 1G
Duplex: Admin Auto, Operational Full
Active-medium: Copper
Switchport settings: access, access-vlan: 2
IP-Address: unassigned, primary
Input packets 70619, bytes 8387001, dropped 0,
Received 51086 broadcasts, 0 multicasts
Input errors 0, runts 0, giants 0,
CRC 0, frame 0, fragment 0, jabber 0
Output packets 55731, bytes 22076360, dropped 0
Sent 66 broadcasts, 33948 multicasts
Output errors 0, collisions 0, late collisions 0,
Excessive collisions 0
RFS7000(config-ext-macl)#permit any 00-15-70-38-08-4c/00-15-70-38-08-4c type wisp
RFS7000(config-ext-macl)#exit
Applying MAC ACL to physical port GE1 and Running Configuration after Config Changes
RFS7000(config)#interface ge 1
RFS7000(config-if)#mac access-group drop_nonwisp in
RFS7000(config-if)#
RFS7000(config)#show running-config
!
! configuration of RFS7000 version 4.1.0.0-040GR
!
version 1.4
!
!
aaa authentication login default local
network-element-id 172.2.1.0/24
!
username "admin" password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username "admin" privilege superuser
username "operator" password 1 fe96dd39756ac41b74283a9292652d366d73931f
!
!
mac access-list extended drop_nonwisp
permit any 00:15:70:38:08:4c/00:15:70:38:08:4c type wisp rule-precedence 10
!
spanning-tree mst cisco-interoperability enable
spanning-tree mst configuration
name My Name
!
ip domain-name Brocade.com
country-code us
logging buffered 4
logging console 4
snmp-server engineid netsnmp 6b8b45673a4fa870