Brocade Mobility RFS7000-GR Controller CLI Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 206)

192 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
Parameters
access-list Use the access list parameter to enter the ext-nacl context and std-nacl
context. The prompt changes to the context entered.
For additional information, see
Extended ACL Instance on page 351 (for extended
ACLs) and Standard ACL Instance on page 373 (for standard ACLs).
default-gateway Configures the default gateway.
•
A.B.C.D – IP gateway address.
dhcp [boot|class|
excluded-address
|option|ping|pool] DHCP Server configuration.
•
bootp – BOOTP specific configuration.
•
ignore – Configures the DHCP Server to ignore BOOTP requests.
•
class –Configurs DHCP server class.
•
WORD – DHCP class name.
•
excluded-address – Prevents the DHCP Server from assigning certain
addresses.
•
A.B.C.D – Low IP Address.
•
option – Defines the DHCP server option name.
•
ping – Specifies the ping parameters used by DHCP server.
•
timeout <1-10 > – Specifies a ping timeout between 1-10 seconds.
•
pool – Configures the DHCP Server address pool.
•
restart – Restarts DHCP Server to get the DHCP config changes into effect.
domain-lookup Enables DNS based name - to - address translation on the switch.
domain-name Sets the domain name for the switch.
http
[secure-server|secure-trustp
oint ] Hyper Text Transfer Protocol (HTTP).
•
secure-server – Secure HTTP server (HTTPS).
•
secure-trustpoint – Enter the name of the trustpoint to be used for secure
connection.
•
server – HTTP server.
name-server Specify the DNS server for the DHCP client. A maximum of 6 name servers can be
configured. Servers are tried in the order entered.
•
A.B.C.D – IP address of Name Server to add.